- < 30 nm resolution in a compact design
- Set-and-forget long-term stability- these actuators stay put
- Lifetimes of 1,000,000,000 steps
Standard Picomotor Actuators
Picomotor actuators are ideal devices for motorizing fine-positioning stages and mounts in your optical or mechanical systems. Use them with our optomechanical translation stages or your own custom devices. They have better than 30-nm resolution with minimal backlash, and can exert a 5-lb (22-N) force. Moreover, they have exceptional longterm stability and the ability to hold their position with no power applied. These last two features make the Picomotor actuators unique among motion-control devices and ideal for typical set-and-hold applications. Such applications include precision control of sample holders inside cold and/or vacuum chambers, hands-off adjustment of hard-to-reach mirror mounts, or adjustments of optical mounts that are sensitive to forces applied while twisting a knob (for instance optimizing the alignment of a laser cavity or adjusting the pointing of a beam over a long distance).
The standard sized shanks of the Models 830X and 12X0.5-mm threading of the Models 832X let them fit into standard micrometer mounting holes. The Time Model 8351 gives you a solution for even the smallest application. For rotation without translation, use the Model 8341 rotating shaft.
Use these Picomotor actuators with our Model 8753 Intelligent Picomotor (iPicoTM) driver or Model 8703 TTL/Analog driver.
Controller and driver example. Here a motorized Pint-sized mount We also offer integrated motion-control solutions.
is being used to align the probe
beam in a pump-probe demonstration.
Specifications
|
8301
|
8302
|
8303
|
8321
|
8322
|
8341
|
8353
|
8354
|
8310
|
Minimum Incremental Motion
|
<30
|
<30
|
<30
|
<30
|
<30
|
NA
|
<30
|
<30
|
<30
|
Resolution- Angular(µrad)1
|
<600
|
<600
|
<600
|
<600
|
<600
|
100
|
<600
|
<600
|
<0.6 µrad
|
Axial Load Capacity (+Cx) (N)
|
22
|
22
|
22
|
22
|
22
|
NA
|
13
|
13
|
22
|
Maximum DriveFrequency(kHz)
|
2
|
2
|
2
|
2
|
2
|
2
|
1.75
|
1.75
|
2
|
Maximum Torque (My)(oz-in)
|
2.5
|
2.5
|
2.5
|
2.5
|
2.5
|
2.5
|
2.0
|
2.0
|
2.5
|
Rated Life2
|
> 1 x 109steps
|
> 1 x 109steps
|
> 1 x 109steps
|
> 1 x 109steps
|
> 1 x 109steps
|
2500 Standard Cycles or >1.5x108 Steps
|
>1,5x108Schritte
|
>1,5x108Schritte
|
> 1 x 109steps
|
Travel (mm2)
|
0.50 (12.7)
|
1 (25.4)
|
2 (50.8)
|
0.50 (12.7)
|
1 (25.4)
|
NA
|
0.50 (12.7)
|
0.50 (12.7)
|
0.50 (12.7)
|
Speed Range
(mm/min)
|
1.2
|
1.2
|
1.2
|
1.2
|
1.2
|
3-4 RPM
|
1.2
|
1.2
|
1.2
|
Operating Temperature Range
(°C)
|
|
10-40
|
10-40
|
10-40
|
|
|
10-40
|
10-40
|
10-40
|
Mounting
|
0.375 in. (9.5 mm) Shank
|
0.375 in. (9.5 mm) Shank
|
0.375 in. (9.5 mm) Shank
|
12 x 0.5 mm Thread
|
12 x 0.5 mm Thread
|
0.375 in. (9.5 mm) Shank
|
0.25 in. shank
|
1/4-40 Thread with retaining nut
|
0.375 in. shank (9.5 mm shank)
|
Connector Type
|
|
4-Pin
|
4-Pin
|
4-Pin
|
|
|
4-Pin
|
4-Pin
|
One Each: 15-Pin D and 4-Pin RJ-22
|
Cable Length[ft. (m)]
|
7 (2.1)
|
7 (2.1)
|
7 (2.1)
|
7 (2.1)
|
7 (2.1)
|
7 (2.1)
|
2.1 (7)
|
2.1 (7)
|
1.8 (6)
|
1 Since these motorized components do not have internal encoders, repeatability is not specified or guaranteed. Step sizes can vary over 20% between the forward and backward directions.
2 Lifetime is tested by cycling actuator out 1 mm of travel range and back pushing a 5-lb load.
Please register as a A&P member to see the documents!