Due to its small outer dimensions OXY-1 SMA can be set up almost anywhere. It is compatible with non-invasive sensors, dipping probes and flow-through cells of type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100 % oxygen). OXY-1 SMA has temperature compensation, so most precise measurements in environments with changing temperature can be taken. This USB-powered oxygen meter is operated with the PreSens Measurement Studio 2 software, which enables simultaneous control of several devices, so measurement networks can be set up. With numerous features and additional pressure and salinity compensation, the software makes the OXY-1 SMA suitable for almost any application where precise oxygen measurements are needed.
· Measurement range of 0 - 100 % oxygen
· Compact system with small outer dimensions
· Light-weighed (only 128 g)
· USB-powered
· Controlled by PreSens Measurement Studio 2
· Compensation of temperature, pressure and salinity
· For use with non-invasive sensors, dipping probes and flow-through cells
· One calibration for a multitude of sensor spots
Compact O2 Meters for Culture Monitoring
The
small OXY-1 SMA devices are ideally suited for all benchtop
applications. Combined with oxygen sensor spots integrated in
transparent bioreactors or other culture vessels they allow
non-invasive, continuous culture monitoring without the risk of
contamination. Connected to one of PreSens' O2 flow-through
cells even the oxygen content in perfusion systems and bypaths can
easily be determined. The OXY-1 SMA devices are quickly installed, easy
to operate and even multiple devices can be controlled from one PC. So
no matter if lab space or time are limited - OXY-1 SMA and OXY-1 SMA
Trace are the solution for culture monitoring!
OXY-1 SMA Devices for Biological Research
The
OXY-1 SMA and OXY-1 SMA Trace can be set up in a few quick steps and
fit almost anywhere. As the devices are powered via USB no extra power
connection, cables or adapters are necessary. Use them for fast checks
on the oxygen content in samples or continuous long-term measurements.
Applicable with different types of slender dipping probes, flow-through
cells or non-invasive oxygen sensor spots the OXY-1 SMA devices can be
used for oxygen monitoring in most different measurement set-ups. Check
the oxygen content in water or sediment samples, monitor microbial O2
consumption or respiration of small organisms, even in perfusion
systems oxygen can be measured continuously. With temperature, pressure
and salinity compensation these oxygen meters always give precise oxygen
measurements and are the tools for every research team.
Quality Control in Food & Beverages with OXY-1 SMA Devices
Set
up in a few easy steps these oxygen meters allow fast assessment of the
oxygen content in products or containers. Avoid oxidative deterioration
and determine the shelf life of your packed food or beverage products,
check oxygen taken up while filling or the air-tightness of packaging. O2
content in headspace as well as in liquid products can be measured. As
these oxygen meters can be combined with sensors in different designs,
e. g. dipping probes, or sensor spots for non-invasive O2 measurements, they can be applied in any stage of the production or filling process and deliver most precise results.
OXY-1 SMA Devices in Material Research
OXY-1
SMA devices can be used with the PreSens Permeation Cell. This
measurement cell allows to determine the oxygen transmission rate of
material films. OXY-1 SMA is suited to analyse perforated, permeable
materials, while OXY-1 SMA Trace can also be used to determine the OTR
in barrier materials. Due to the non-invasive, optical measurement
principle the compact oxygen meters do not have to be permanently
connected to one Permeation Cell so several samples can be analyzes in
parallel. The OXY-1 devices and Permeation Cells are an easy-to-handle
and space saving system for oxygen permeability determination in
material research.
Technical
Specifications |
|
Oxygen sensor |
PSt3 (optical SMA connector) |
Temperature sensor |
Pt100 temperature connector (sensor not included) |
Temperature performance |
from 0 °C to + 50 °C , resolution ± 0.1 °C, accuracy ± 1.0 °C |
Power supply |
5 VDC (USB-2.0-Mini-B, cable included) |
Temperature: operating / storage |
from 0 °C to + 50 °C / from - 20 °C to + 70 °C |
Relative humidity |
0 % to 80 % (non-condensing) |
Dimensions |
95 mm (with connectors) x 34 mm x 30 mm |
Weight |
128 g |
Digital Interface |
USB interface cable to PC (cable included) |
Please register as a A&P member to see the documents!