SLC 30W Fiber Laser Isolator
Benefits:
● Rugged, environmentally hardened assembly assures limited down time for marking systems due to laser problems
● Minimal beam distortion results in clear, distinct part marking
Features
● Critical components are designed to minimize return loss which can degrade laser performance
● Proper steering and heat sinking of backward traveling light assures isolator performance does not degrade over time due to heating
● Protective armor cabling for fiber is standard
Specificationsa
| Part Number |
110-10353-0001 |
| Fiber Typesb |
Contact EOT |
| Maximum Incident Average Power (W) |
30 |
| Center Wavelength (nm) |
1065 ± 15 |
| M2 Degradatio (%) |
<10 |
| Standard Output Beam Diameter (1/e2,mm)c |
7.5 ± 1.5 |
| Insertion Loss (dB) |
<0.5 |
| Isolation at 10-50°C (dB) |
>20 |
| Isolation at 30°C (dB) |
>28 |
| Return Loss (dB) |
<-50 |
| Reverse Power Handling |
≤15W for 30 sec. max. |
| Maximum Pulse Energy (mJ) |
1 |
| Operating Temperature (°C) |
10-50 |
| Storage Temperature (°C) |
0-60 |
| Storage Humidity, non-condensing (%) |
10-90 |
a Product specifications are subject to change.
b RoHS compliant.
c Standard fiber length is 3m, protective Teflon tubing length is 2.15m in a 2m armor cable jacket.Customers should contact EOT regarding other fiber requirements.
a All dimensions in millimeters
b Length shown is for 7.5mm 1/e2 beam diameter.
Please register as a A&P member to see the documents!