Feature
● Shielded output connectors
● Independently current-limited outputs
● Universal, auto-select AC input, accepts 100 to 240 Vac
● Current-limited outputs

Introduction
The BIM-5001 power supply is intended for use with photoreceivers and amplifiers, but can also be used for general laboratory applications. Two of the three ±15V outputs have microconnectors that are shielded to reduce electrical coupling from external noise sources. The third output has banana jacks for use with other laboratory equipment.

All three outputs are independently current limited to prevent damage. If a load draws current beyond the specified limit, the voltage to that load drops very rapidly, reducing the available power and preventing damage to the power supply and the attached equipment.

Specification
● Output Voltage: ±15V±3%
● Ripple: < 1 mV(rms)
● Recovery Time: < 100μs
● Average Temperature Coefficient:  < 300ppm/°C
● Output Current: 0.3A Max /0.1A Max

Typical Result

Fig1：The output voltage drops rapidly when the load draws more than the rated current(0.1A).

Fig2：The output voltage drops rapidly when the load draws more than the rated current(0.3A).

Order Information