仪器介绍
易用型驱动器提供较精密的速度控制和转速数字显示——计量应用的理想选择
流速:0.6~3400mL/min(取决于驱动器转速和泵管尺寸)
四位LED显示电机转速——方便观察速度设置
双向马达——使用前后可清理泵管,可双向传输流体
强劲的驱动器可叠加2个或4个泵头,增加流速,用于多通道应用,薄膜按键,前面板控制,可设置速度、运行方向、开/关。单独的速度和电源(开/关)控制,改变驱动器开关状态亦可维持速度设定不变。防溅ABS塑料外壳,防护等级IP33。通过背部的DB9插口,可实现远程控制功能。
随机配备:1.8m电源线,带IEC 320/CEE22插口。
订购指南
速度控制:±0.25%
马达功率:1/10hp(75W)
防护等级:IP33
尺寸(L×W×H):25.4×21.6×21.6cm
电源:90-260VAC,50/60Hz
07528-30
转速:1-100rpm
可叠加泵头数:4
- Easy-to-use drives offer precise speed control and digital display of rpm—ideal for metering applications
- Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
- Three digit LED display shows motor rpm—confirm speed setting at a glance
- Reversible motor—purge tubing before or after pumping; pump fluid in either direction
- LED indicators confirm motor direction
- Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
- Separate speed and power (on/off) control—maintain speed setting while turning pump on/off
- Stackable, splash-resistant ABS plastic housing; IP33 rated
- Remote control capabilities via a DB9 female connector on back of drive
- Speed control input: 4 to 20 mA or 0 to 10 VDC
- Pump direction (CW/CCW) via open collector or contact closure
- Start/stop via open collector or contact closure
- Membrane keypad for easy up-front control of speed, direction, and start/stop
These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); or control start/stop via footswitch 77595-35. Order control accessories on facing page.
What's Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.
Specifications |
Product Type |
Masterflex L/S Drives |
Max flow rate (mL/min) |
580 |
Min flow rate (mL/min) |
0.06 |
Control type |
Variable speed analog |
Power (Amps) |
2.2 at 115 VAC
1.1 at 230 VAC |
Motor (hp) |
1/10 |
Motor (watts) |
75 |
Reversible motor |
Yes |
rpm |
1 to 100 |
IP rating (Drive) |
IP33 |
Dimensions (Drive) |
10.8" x 8.3" x 8.5"
(27.4 x 21.1 x 21.6 cm) |
Speed control |
±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm) |
No. of Pump heads accepted |
4 |
Type of Pump heads accepted |
Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm |
Manufacturer number |
07528-30 |
如需要点击下载此文件资料,请点击
注册/
登陆A&P网站,谢谢!